Home / News

What are the installation points to be observed for table top processing equipment

        The installation work before using the quartz stone countertop processing equipment is a very important step, so for this work must be given full attention. And need to be mastered by the following points of the professionals to install and operate only, because only to be able to successfully complete the installation and avoid hidden problems in the future use.


  To ensure the safety of quartz stone countertop processing equipment: in the installation of quartz stone countertop processing equipment, can not be in the thunderstorm weather for this operation, because then there is not only lightning and thunder easily triggered by safety accidents, and air humidity may lead to electrocution, so you should choose dry and sunny weather for operation. At the same time good quality quartz stone countertop processing equipment manufacturers also reminded not to be able to install power outlets in particularly wet locations, and operators must know how to install in accordance with strict safety norms.

  Quartz stone countertop processing equipment power supply voltage and wiring should be in line with the norms: in order to ensure that the quartz stone countertop processing equipment can work steadily, so must be provided to a very stable power supply voltage, and the voltage range must be in line with the requirements of the regulations, otherwise there should be professional technical personnel to guide and select the voltage regulator or take some measures to meet the requirements of use. Also note that quartz stone countertop processing equipment and control cabinets must be grounded, not to plug the data cable with electricity, so to avoid such violations.


  Installation of quartz stone countertop processing equipment to be stable in place: when the specific installation of quartz stone countertop processing equipment, the relevant screws should be installed in place, but at the same time not too hard to avoid the phenomenon of slippery wire. Inexpensive quartz stone countertop processing equipment manufacturers stressed that especially the location of the tool because of the need to carve, so the installation must be solid enough and clamping the tool, the use of the process should keep the sharpness of the tool to meet the requirements, otherwise it should be replaced in a timely manner to avoid the knife is not sharp enough to cause motor overload and affect the carving effect.


  The above is the quartz stone countertop processing equipment installation points include several aspects, in addition to moving the machine should have a professional present to guide. If the installation or use of quartz stone countertop processing equipment found to have abnormalities, then should be in accordance with the operating manual for troubleshooting or immediately find the dealer contact to solve, do not disassemble without authorization to avoid causing human damage.